Questions? Email us: hello@h2olife.co.uk / WhatsApp: +44(0)7826949291

Product Detail

Berkey PF-4 Fluoride and Arsenic Filters (4 pack)

£126.34

Add to Wishlist

The Berkey PF-4 Fluoride and Arsenic reduction elements are designed for use with the 7 Inch Long Mount Doulton Super Sterasyl and the Doulton ATC Super Sterasyl™ ceramic filtration elements which are used in the Doulton SS Gravity Water Filter Systems.

The PF-4 filters adsorb the following four unwanted elements most commonly found in drinking water.

 

Reduces:

- MTBE (Methyl-tertiary-butyl-ether)
- Fluoride
- Lead
- Arsenic

 

PF-4™ filters are also designed to adsorb:

- DBCP (Dibromo-chloro-propane)
- THMs (trihalomethanes)
- Herbicides & Pesticides
- Heavy Metal ions

 

How to add the Fluoride filters to your Gravity System


The PF-4 Filters are fitted in the lower chamber of the Gravity system (not the upper chamber), so they will reduce the lower chamber water holding capacity slightly.

 

Before the PF-4 filters can be added they must be primed. With the blue caps still in place, simply clean the filter with soap and water by hand and then rinse. Then remove the blue caps from each end and place the rubber priming button onto the bottom end of the filter (the end the flow arrow points to). Press this up against a sink tap and create a good seal and gently turn on the cold water until the water flows through the end for at least 1 minute.

 

Do this until the water runs clear and then turn it over and do the same thing but now with the top end. Turn on the cold water again and allow the water to flow through for 1 minute or longer until the water turns clear. Your PF-4 element will then be primed and ready to install.

 

Assemble the water filter as per the water filter assembly instruction. On the underside of the upper chamber locate the stem of each ceramic filter (do not remove the wing nut holding the ceramic filter in place). With clean hands, remove blue caps and screw a PF-4 filter onto each filter stem (the blue arrow should point away from upper chamber) giving five full revolutionsDo not screw more than five revolutions as this may damage the internal media screen. 

 

When complete, seat upper chamber on top of the lower chamber. Fill upper reservoir. When the lower reservoir is full, discard the first batch of water, which may contain process dust. (Note: when lower chamber is full of water, the PF-4 filters will be immersed).

Berkey PF-2 Fluoride and Arsenic Manual 

Model Berkey PF-4 Fluoride and Arsenic Filters (4 pack)
SKU PF-4
Brand Berkey
Daily Deal No
In Depth Under normal conditions it is recommended that PF-4™ elements be replaced at six-month intervals (Actual capacity is dependent on the presence of other competing contaminants in the source water. High levels of total organic carbons, volatile organic compounds or certain inorganic minerals may reduce the capacity and efficiency of these elements.)*. Note: do not boil this element.

The PF-4™ is manufactured to exceed ANSI/NSF Standard 53 which requires that MTBE be reduced by at least two thirds from an influent rate (water going in) of 15ppb to an effluent rate (water going out) of less than 5ppb (> 95% reduction*). LEAD:

Tests have shown that when 2000 gallon (7,600 liters) of influent water at a concentration of lead of 150-200 ppb pass through 200 grams of media at a flow rate of 1 gpm (3.8 lpm), the lead level was reduced to less than 1ppb (>99% reduction).

FLUORIDE:

Testing for fluoride was based on 20-30ppm of the ion in the influent aqueous solution at a flow rate of no more than 3 gpm (11 lpm) per cubic foot of media. Results of < 1ppm of the fluoride ion in the effluent were typical for the media (>95% reduction).Under optimum conditions, effluent concentrations of less than 50 ppb were readily achieved (>99.75% reduction).

FREE NEXT DAY UK DELIVERY


We offer free next day UK Delivery for orders before 1PM and are £45 and over. You will receive a tracking ID from us when your goods are dispatched allowing you to track your package in real-time.

For or full delivery information including international shipping, please click here to view full delivery information.

Warranties and Guarantees


Any warranty or guarantee applied to goods sold at the behest of a third party shall be the responsibility of the said third party absolutely and any correspondence entered into must initially be carried out between the purchaser and the Company.

Goods sold as manufactured by or being the service of the Company shall be subject to such warranties and guarantees as may be stated by the Company and correspondence should be entered into with the Company in writing exclusively.

No warranty or guarantee shall be applied or implied other than at the time of purchase.

In any event all goods or services purchased here in shall be subject to an unconditional warranty for a period of 30 days, said warranty not to exceed the value of the purchase.

SECURE PAYMENTS


Payments made on H2O Life are securely encrypted with 256-bit encryption we ensure your data is 110% safe. When shopping online, always ensure that your browser shows a green padlock on the address bar and the URL starts with https.

We accept credit and debit cards, apple pay and American Express as well as PayPal. We will soon be implementing Amazon Checkouts, which means you can use your Amazon account details to make payments.

As mentioned above, your transactions are secure so you can shop with a peace of mind.