Questions? Email us: hello@h2olife.co.uk / WhatsApp: +44(0)7826949291

Accessories

£18.94
Buy the 1/2" feed in valve for easy connection to a male or female 1/2" connection with the option of either a shut off valve for either 1/4" tubing or 3/8" tubing.
Buy the 1/2" feed in valve for easy connection to a male or female 1/2" connection with the option of...
£11.35
This John Guest Speedfit 1/4" push fit to 1/2" BSP connector is commonly used to connect water filter systems using 1/4" tubing to 3-Way Triflow Taps as well as Opella Saddle Valves and stop valves. This connector does not require the use of PTFE tap and should be hand tightened only, do not over tighten. The John Guest Speedfit 1/4" push fit to 1/2" BSP connector fits neatly onto the end of our flexi-hoses for our range of 3-Way Triflow Taps:   The John Guest Speedfit 1/4" push fit to 1/2" BSP connector is also used for Opella Saddle Valves:  
This John Guest Speedfit 1/4" push fit to 1/2" BSP connector is commonly used to connect water filter systems using 1/4"...
£11.35
1/4"tube x 1/2" Male Connector (BSPT)
1/4"tube x 1/2" Male Connector (BSPT)
£10.09
1/4"tube x 1/2" Male Connector (BSPT)
1/4"tube x 1/2" Male Connector (BSPT)
£11.35
This John Guest Speedfit 1/4" Push Fit to 3/4" BSP John Guest Push Fit Adaptor is used to connect water filter systems using 1/4" tubing to 3/4" male BSP fittings. This connector does not require the use of PTFE tap and should be hand tightened only, do not over tighten. JG Female Adaptor 1/4" PF x 3/4" F BSP (Flat Face Seal) Product code: CI320816FS
This John Guest Speedfit 1/4" Push Fit to 3/4" BSP John Guest Push Fit Adaptor is used to connect water filter...
£7.57
This fitting has a 3/8" Male threaded end and a 1/4" push fit end. It is perfect for connecting your 1/4" tube to a female 3/8" threaded end. Product AMCBT0406.
This fitting has a 3/8" Male threaded end and a 1/4" push fit end. It is perfect for connecting your...
£11.35
The 1/4” Pushfit x 1/4” Pushfit Elbow is designed to connect two 1/4 Inch plastic tubes together via a right angle elbow, the perfect solution if you need to run tubing over a longer distance, perhaps to connect your water filter system to a fridge, ice maker, coffee machine and so on. Acetal copolymer constructionO-rings are NBR (Buna-N)Unique oval collet designFDA approved materialsFor water, air, gasses, vacuum, & liquidsNSF Certified 51 & 61Fittings may be gray or white based on availability
The 1/4” Pushfit x 1/4” Pushfit Elbow is designed to connect two 1/4 Inch plastic tubes together via a right...
£21.46
This product enables you to connect a 3/8" tube to a 15 mm copper or plastic pipe and includes a shut-off ball valve for easy and quick shut off of the water flow. The product makes a fantastic and professional alternative to saddle valves. There are two ends which feature a 15 mm push fit connection, and a T-piece which has a shut off valve with a 3/8" push fit connection. This product uses both Push-fit and Twist-locking technology which guarantees secure leak free connections. This product is suitable for plumbing, local/home hot water supplies and central heating systems and is also compatible with a variety of piping materials, such as Copper, ePVC and PEX pipe, making it easy to combine different sorts of pipe for repairs and new installations.
This product enables you to connect a 3/8" tube to a 15 mm copper or plastic pipe and includes a...
£21.46
This product enables you to connect a 3/8" tube to a 15 mm copper or plastic pipe and includes a shut-off ball valve for easy and quick shut off of the water flow. The product makes a fantastic and professional alternative to saddle valves. There are two ends which feature a 15 mm push fit connection, and a T-piece which has a shut off valve with a 3/8" push fit connection. This product uses both Push-fit and Twist-locking technology which guarantees secure leak free connections. This product is suitable for plumbing, local/home hot water supplies and central heating systems and is also compatible with a variety of piping materials, such as Copper, ePVC and PEX pipe, making it easy to combine different sorts of pipe for repairs and new installations.
This product enables you to connect a 3/8" tube to a 15 mm copper or plastic pipe and includes a...
£21.46
Some 3 way taps have two hoses for cold and hot and a 7/16" threaded stem for connecting a 1/4" or 3/8" tubing to it. If you want to bypass this and go straight to 1/2" then you need this kit. The kit includes 1 x 7/16"UNS to 3/8" Push Fit 1 x 3/8" Push Fit to 1/2" Female 2 metres of 3/8" Tubing
Some 3 way taps have two hoses for cold and hot and a 7/16" threaded stem for connecting a 1/4"...
£11.35
This John Guest Speedfit 3/8" Push Fit to 3/4" BSP John Guest Push Fit Adaptor is used to connect water filter systems using 3/8" tubing to 3/4" male BSP fittings. This connector does not require the use of PTFE tap and should be hand tightened only, do not over tighten. JG Female Adaptor 3/8" PF x 3/4" F BSP (Flat Face Seal) Product code: CI321216FS
This John Guest Speedfit 3/8" Push Fit to 3/4" BSP John Guest Push Fit Adaptor is used to connect water filter...
£7.57
This fitting has a 1/4" Male threaded end and a 3/8" push fit end. It is perfect for connecting your 3/8" tube to a 3/8" flexible hose with a female 1/4" threaded end.
This fitting has a 1/4" Male threaded end and a 3/8" push fit end. It is perfect for connecting your...
£6.30
This is little connector you need to convert 3/8" (10mm diameter) tubing to 1/4" (6mm diameter) tubing in either direction. Standard Mur-lok® fittings are constructed of white polypropylene with two EPDM o-rings at each quick-connect end.
This is little connector you need to convert 3/8" (10mm diameter) tubing to 1/4" (6mm diameter) tubing in either direction....
£8.83
The Mur-lok 3/8” Pushfit x 3/8” Pushfit Elbow is designed to connect two 3/8 Inch plastic tubes together via a right angle elbow, the perfect solution if you need to run tubing over a longer distance, perhaps to connect your water filter system to a fridge, ice maker, coffee machine and so on.
The Mur-lok 3/8” Pushfit x 3/8” Pushfit Elbow is designed to connect two 3/8 Inch plastic tubes together via a...
£11.35
This John Guest Speedfit 5/16" Push Fit to 1/2" BSP John Guest Push Fit Adaptor is used to connect water filter systems using 5/16" tubing to 1/2" male BSP fittings. This connector does not require the use of PTFE tap and should be hand tightened only, do not over tighten. JG Female Adaptor 5/16" PF x 1/2" F BSP (Flat Face Seal) Product code: PI451014FS
This John Guest Speedfit 5/16" Push Fit to 1/2" BSP John Guest Push Fit Adaptor is used to connect water filter...
£16.41
BACWATER Sanitisation Liquid
BACWATER Sanitisation Liquid
£15.15
Buy the Compression Tee - 15mm with 3/4" Male BSP Tap for professional connection of 3/4" hoses or any size flexible tubing (3/8", 5/16" or 1/4" - 10mm, 8mm or 6mm) to a 15mm copper pipe
Buy the Compression Tee - 15mm with 3/4" Male BSP Tap for professional connection of 3/4" hoses or any size...
£12.63
The ARD0405 enables you to connect a 1/4 Inch Push Fit Tube to a 5/16 Inch Push fitting via the use of a 5/16" Stem. Features: - Acetal copolymer construction O-rings are NBR or EPDM - Unique oval collet design FDA approved materials - For water air gases vacuum & liquids - NSF Certified 51 & 62 - Fittings may be gray or white based on availability - Plug-In Stem Elbows Reducers & Enlargers - All Acetal Inch Size Fittings Stem Adapters
The ARD0405 enables you to connect a 1/4 Inch Push Fit Tube to a 5/16 Inch Push fitting via the...
£18.94
A reducer to convert a ¾" BSP male supply connection down to a 1/4" push-fit connector. Provides a means of connecting the 1/4" flexible tubing used in the installation of refrigerator water filters or water purifiers etc, to the main water supply. Fitted with integral washer on the inlet side.- Integral brass insert to withstand water pressure- Body length: 35mm- WRAS approved
A reducer to convert a ¾" BSP male supply connection down to a 1/4" push-fit connector. Provides a means of...
£13.89
Easier and faster installation of the equipment.Mounted without tools. Optimum flow characteristics.No changes in cross section. 100 -% cleaning ability. Applicable with plastic and metal pipes. SK-approval.Loosen and securing the connections multiple times possible.Dimensions: 5/16 "suitable for tubing 8 mm x 4 mm; 3/8" hose fitting for 6.7 x 9.5 mm; 1/2 "hose to fit 9.5 x 12.7 mm  
Easier and faster installation of the equipment.Mounted without tools. Optimum flow characteristics.No changes in cross section. 100 -% cleaning ability....
£12.63
Acetal copolymer constructionO-rings are NBR (Buna-N)Unique oval collet designFDA approved materialsFor water, air, gasses, vacuum, & liquidsNSF Certified 51 & 61Fittings may be gray or white based on availability WRAS Approved.
Acetal copolymer constructionO-rings are NBR (Buna-N)Unique oval collet designFDA approved materialsFor water, air, gasses, vacuum, & liquidsNSF Certified 51 &...
£6.30
The John Guest Reducer Union Fitting 5/16 x 3/8 inch is used to connect tubing of 3/8" to 5/16" in either direction.   It is a push in type fitting and has a release mechanism via pressing with equal pressure around the outer circle rim to release the tubing.
The John Guest Reducer Union Fitting 5/16 x 3/8 inch is used to connect tubing of 3/8" to 5/16" in...
£12.63
The AEL0605 enables you to connect a 3/8 Inch Push Fit Tube to a 5/16 Inch Push fitting via the use of a 5/16" Stem. Features: - Acetal copolymer construction O-rings are NBR or EPDM - Unique oval collet design FDA approved materials - For water air gases vacuum & liquids - NSF Certified 51 & 62 - Fittings may be gray or white based on availability - Plug-In Stem Elbows Reducers & Enlargers - All Acetal Inch Size Fittings Stem Adapters
The AEL0605 enables you to connect a 3/8 Inch Push Fit Tube to a 5/16 Inch Push fitting via the...
£11.35
For use with spot face ports. Features  Push-fit technology Quick disconnection without the need for tools Food Quality and suitable for potable liquids Suitable for soft metal or plastic tubes Suitable for air or inert gases Superior flow characteristics
For use with spot face ports. Features  Push-fit technology Quick disconnection without the need for tools Food Quality and suitable...
£15.15
DMFit 5/16 x 5/16 Power Elbow APSEU0505 Easier and faster installation of the equipment.Mounted without tools. Optimum flow characteristics.No changes in cross section. 100 -% cleaning ability. Applicable with plastic and metal pipes. SK-approval.Loosen and securing the connections multiple times possible.Dimensions: 5/16 "suitable for tubing 8 mm x 4 mm; 3/8" hose fitting for 6.7 x 9.5 mm; 1/2 "hose to fit 9.5 x 12.7 mm  
DMFit 5/16 x 5/16 Power Elbow APSEU0505 Easier and faster installation of the equipment.Mounted without tools. Optimum flow characteristics.No changes...
£11.35
Product code: AUC0505 Works with 8mm and 5/16" tubing. - Acetal copolymer construction- O-Rings are NBR or EPDM- Unique oval collet design- FDA approved materials- For water, air, gases, vacuum and liquids- NSF certified 51 & 62
Product code: AUC0505 Works with 8mm and 5/16" tubing. - Acetal copolymer construction- O-Rings are NBR or EPDM- Unique oval...
£7.57
DMfit Plug-In Stem Elbow - 1/4 Tube x 1/4 Stem Acetal copolymer constructionO-rings are NBR (Buna-N)Unique oval collet designFDA approved materialsFor water, air, gasses, vacuum, & liquidsNSF Certified 51 & 61Fittings may be gray or white based on availability
DMfit Plug-In Stem Elbow - 1/4 Tube x 1/4 Stem Acetal copolymer constructionO-rings are NBR (Buna-N)Unique oval collet designFDA approved...
£13.89
Empty Refillable Cartridge 2.5" x 10" White. Refillable and reusable 10" empty cartridge. Be able to fill it with any media for your own use.
Empty Refillable Cartridge 2.5" x 10" White. Refillable and reusable 10" empty cartridge. Be able to fill it with any...
£18.94
Empty Refillable Cartridge 4.5" x 10" White. Refillable and reusable 10" empty cartridge. Be able to fill it with any media for your own use.
Empty Refillable Cartridge 4.5" x 10" White. Refillable and reusable 10" empty cartridge. Be able to fill it with any...
£24.00
Empty Refillable Cartridge 4.5" x 20" White. Refillable and reusable 20" empty cartridge. Be able to fill it with any media for your own use.
Empty Refillable Cartridge 4.5" x 20" White. Refillable and reusable 20" empty cartridge. Be able to fill it with any...
£990.57
Osmio Water have partnered with South East Water Scientific Service’s state-of-the-art laboratory to offer you preferential rates on all of your water quality testing and sampling. Together we offer a hassle free, friendly and professional water quality testing services so that you can ensure you know what is in your private water supply, treat the water according to your need and desires and also comply with the relevant regulations.  The Full Audit Suite package is a comprehensive water quality testing service, suitable for both domestic and commercial requirments, tests for a wide range of area of microbiology, parisitology, and chemistry. It is beneficial to have the Full Audit Suite Water testing Service in order to check that there are no significant issues that need to be addressed which could cause long term health problems. It may also be worthwhile assessing the likelihood of cryptosporidium / giardia entering the water supply if you are on...
Osmio Water have partnered with South East Water Scientific Service’s state-of-the-art laboratory to offer you preferential rates on all of your water...
£89.70
Ideal for all ORP testing, including anti-oxidant measurement, water purification applications, ionizers, agriculture, aquariums & aquaculture, chlorine monitoring, cooling tower disinfection, environmental testing, fruit & vegetable washing, hydroponics, metal finishing, ozone system monitoring, pharmaceutical & medical applications, pools & spas, pulp bleaching, vineyards & wineries and water treatment. Features of the HM Digital ORP-200: Waterproof ORP Test Meter Measures Oxidation Reduction Potential (Redox) and Temperature  Auto-ranging calibration with digital fine tuning  Includes storage solution in a sponge embedded in a clear cap  Waterproof housing (IP-67 rating)  Simultaneous temperature display  Digital Calibration (push button)  Auto-off function, data-hold function and low-battery indicator.  Display: large and easy-to-read LCD screen includes simultaneous temperature reading.  Replaceable Sensor (model SP-O2)  Factory Calibrated: The ORP-200 meter is factory calibrated to +200 mV  The meter can be easily recalibrated with digital calibration using the push buttons, rather than a screwdriver. Includes a cap, batteries, and lanyard
Ideal for all ORP testing, including anti-oxidant measurement, water purification applications, ionizers, agriculture, aquariums & aquaculture, chlorine monitoring, cooling tower...
£32.84
TDS stands for total dissolved solids and is a general measure of water quality.  It is used as an indication of aesthetic characteristics of drinking water and as an aggregate indicator of the presence of a broad array of chemical ingredients. Total Dissolved Solids (TDS) are the total amount of mobile charged ions, including minerals, salts or metals dissolved in a given volume of water, expressed in units of mg per unit volume of water (mg/L), also referred to as parts per million (ppm). TDS is directly related to the purity of water and the quality of water purification systems and affects everything that consumes, lives in, or uses water, whether organic or inorganic, whether for better or for worse. The HM Digital TDS-3 Water Tester is to monitor the effectiveness of the RO Membrane and ideal for commercial and domestic use and comes complete with a vinyl leather carry case and belt...
TDS stands for total dissolved solids and is a general measure of water quality.  It is used as an indication of...
£18.94
Dosage housing for hygienising of domestic reverse osmosis filter systems, housing has 1/4" push fit
Dosage housing for hygienising of domestic reverse osmosis filter systems, housing has 1/4" push fit
£8.83
This John Guest fitting will allow you to fit 1/4" (10mm) water filter pipe onto a standard 7/16" (11mm) drinking tap base thread (also called the shank - this is the under-sink side which is a threaded section). This John Guest 1/4 Inch Push Fit to 7/16 UNS Female Thread makes connecting the tubing to the tap extremely easy, which is a particular bonus when working in confined spaces. The fitting is ideal for use with drinking water filter systems, water conditioners, ice makers, drinks coolers and RO systems. The fitting will fit virtually all single dispensing taps and the vast majority use the 11mm thread at the base. The fitting is suitable for use in both hot and cold water applications.
This John Guest fitting will allow you to fit 1/4" (10mm) water filter pipe onto a standard 7/16" (11mm) drinking...
£7.57
Model number: PPSV040808W For use with 1/4 Inch (6.25 mm diameter) water filter tube. Use this handy device to provide a shut off facility to your water filter system. By simply turning the blue handle, you will shut off supply to your water filter or water cooler system. The shut off valve is very useful for use with Reverse Osmosis Water Filters, Fridge water filters, Fish tanks, Ice makers, Coffee Machines, Home breweries, Water Coolers, Hot Water taps and many other applications. Otherwise known as a "ball-valve" the John Guest shut off valve is the most reliable and high quality with NSF certification (standard 51 and 62) and FDA approved materials, guaranteeing safety with water and food applications.
Model number: PPSV040808W For use with 1/4 Inch (6.25 mm diameter) water filter tube. Use this handy device to provide a...
£12.63
Buy the John Guest 1/4" Tubing for all your water filter needs. Especially useful if you cannot locate your water filter system directly under the kitchen sink or if you wish to use a T-piece to send filtered water to your fridge, ice maker, coffee machine or Quooker.
Buy the John Guest 1/4" Tubing for all your water filter needs. Especially useful if you cannot locate your water...
£12.63
The John Guest 15mm x 3/8" Straight Connector  is a push-fit plastic fitting for the connection of plastic and copper pipe. It is designed and manufactured in the UK by John Guest Speedfit. Simply push the fitting fully onto the 15mm pipe to lock in place and push fit thje other end into your 3/8 Inch tubing. Should the need arise to demount the connection, push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: With all plastic pipes the relevant manufacturer's pipe insert is required. Features  Push-fit and demountable connections Suitable for hot and cold water and central heating systems Grip and Seal connection Lead free and non toxic No scale build up...
The John Guest 15mm x 3/8" Straight Connector  is a push-fit plastic fitting for the connection of plastic and copper...
£12.63
The John Guest 3/8" Pushfit Tee Piece Connector is ideal for connecting your water filter to your fridge or coffee maker or Quooker. This genuine NSF certified John Guest fitting enables your to run your water filter to two other appliances using a Tee Piece type connector.
The John Guest 3/8" Pushfit Tee Piece Connector is ideal for connecting your water filter to your fridge or coffee...
£11.35
The John Guest 3/8" Pushfit x 3/8" BSP Male Straight Adapter. Part number: PI011213S For use with spot face ports. Features  Push-fit technology Quick disconnection without the need for tools Food Quality and suitable for potable liquids Suitable for soft metal or plastic tubes Suitable for air or inert gases Superior flow characteristics
The John Guest 3/8" Pushfit x 3/8" BSP Male Straight Adapter. Part number: PI011213S For use with spot face ports. Features ...